Thermal Pipe Systems, Inc. VEE-TITE® 230 Gasketed Coupling FRP System Featuring High Flow, Corrosion Free Service For Condensate and Low Temperature Hot Water Vee-Tite is a lightweight, easy to install, energy efficient piping system for use in low temperature hot water and condensate return service. This system may be used for water only in temperatures to 230ºF at pressures to 150psi. The carrier pipe is filament wound epoxy pipe with a resin rich liner. The system is produced with a grooved FRP coupling containing high temperature rubber ‘V’ rings. Insulation is thermally efficient polyurethane foam with a ‘K’ factor of 0.16 at 70ºF. The heavy wall PVC or HDPE casing and heat resistant end seals keep the insulation dry. A complete line of fittings is available for this system. To join Vee-Tite simply push the spigot ends into the couplings. A lubricant is provided for ease of installation. The rubber ring joint compensates for expansion, contraction, and earth movement. The piping system is non- corrosive and maintains very high flow characteristics. It is an excellent choice for underground condensate return lines, district heating systems, dual temperature lines, and geothermal heating systems. The piping system is approved for use by Federal Agencies for condensate, hot and chilled water. The coupling comes preinsulated for ease of installation. TECHNICAL DATA VEE-TITE® 230 PIPE